The bedroom should be a comfortable and secure area. Perhaps you have already painted your walls a warm and calming hue to match and emanate this sense of ease. But something is missing...perhaps a touch of color might enliven it.
If you are hesitant to paint an accent wall, consider painting the bedroom door instead!
Painting bedroom doors is a minor undertaking that is readily modified and a terrific way to add flair!
Uncertain about which colors to use or how to complete the task yourself? Let our professionals serve as your palette guide and how-to expert.
Here are some good door color options for your bedroom:
Blushing (SW6617)
Bluebell (SW6793)
Aquastone (SW9043)
Cloak Gray (SW6278)
Take Off the Door
The initial step is to remove the door from its hinges.
Close the door and use a hammer and nail to loosen the hinge pin. Tap the hinge with a screwdriver with a flat head until it can be removed. Crack the door open and gently pull it to the side to disengage it from the hinges.
Remove Door Fittings
Utilize a screwdriver to unscrew and remove all the hardware, including the doorknob assembly and hinges. Keep everything in a box or container for subsequent reinstallation.
Dust the Door
Sand the door's whole surface using the sanding block or electric sander. The purpose of sanding is to remove the shiny top layer of finish and to smooth the door's surface. Dust off the surface with a clean rag.
Perform Edge Work
Utilize the paintbrush to begin painting the door's edges. Beginning at the inside edge of the hinge, move clockwise around the door from the header to the striker side to the bottom.
Decorate the Door
Paint the door surface with the little roller by rolling it up the door's height. After extending three to four widths with the roller, use the brush dipped in a small amount of paint to complete and smooth roller lines. Repeat until the entire door face is coated with paint, then allow to dry. After the door has dried, flip it over and repeat these steps on the opposite side.
Reinstall Door Hardware
Utilize the screwdriver to reinstall the door's hinges and doorknob assembly.
Install the Door
If necessary, align the hinge leaves with a pry bar before reinstalling the door on the hinges. Reposition the hinge pin and tap it home with a hammer.
Disclaimer - this is a referral site. All work is performed by a licensed partner company.